Version 1.15. This version is no longer supported. For more information see the version support policy.

Back up and restore a user cluster

This document shows how to backup and restore the etcd store for a user cluster. This page also provides a script that you can use to automatically back up a cluster's etcd store.

You can create a backup file for recovery from unforeseen disasters that might damage your cluster's etcd data. Store the backup file in a location that is outside of the cluster and is not dependent on the cluster's operation.

Limitations

This procedure does not back up application-specific data.
This procedure does not back up your PersistentVolumes.
Workloads scheduled after you create a backup aren't restored with that backup.
You cannot restore a cluster after a failed upgrade.
This procedure is not intended to restore a deleted cluster.

Backing up a user cluster

A user cluster backup is a snapshot of the user cluster's etcd store. The etcd store contains all of the Kubernetes objects and custom objects required to manage cluster state. The snapshot contains the data required to recreate the cluster's components and workloads.

The backup steps that you follow depend on whether Controlplane V2 is enabled on the user cluster. When Controlplane V2 is enabled, the control plane for the user cluster runs on the user cluster itself. When Controlplane V2 isn't enabled, the control plane for the user cluster runs on one or more nodes in the admin cluster, which is referred to as kubeception.

Run the following command to determine whether the cluster has Controlplane V2 enabled:

kubectl get onpremuserclusters --kubeconfig USER_CLUSTER_KUBECONFIG \
  -n kube-system -o jsonpath='{.items[0].spec.enableControlplaneV2}' && echo

If the output is true, follow the Controlplane V2 steps to back up the cluster. Otherwise, follow the Kubeception steps. The backup steps are the same except for the locations of the keys, certificates, and the etcd Pod's name.

Kubeception

Get a shell into the kube-etcd container:
```
kubectl --kubeconfig ADMIN_CLUSTER_KUBECONFIG exec -it \
 kube-etcd-0 -c kube-etcd -n USER_CLUSTER_NAME \
 -- /bin/sh
```
where:
- ADMIN_CLUSTER_KUBECONFIG is the admin cluster's kubeconfig file.
- USER_CLUSTER_NAME is the name of the user cluster.

In your shell, in the /tmp directory, create backup named snapshot.db:

ETCDCTL_API=3 etcdctl \
  --endpoints=https://127.0.0.1:2379 \
  --cacert=/etcd.local.config/certificates/etcdCA.crt \
  --cert=/etcd.local.config/certificates/etcd.crt \
  --key=/etcd.local.config/certificates/etcd.key \
  snapshot save /tmp/snapshot.db

In your shell, enter exit to exit the shell.

Copy /tmp/snapshot.db from the kube-etcd container to the current directory:

kubectl --kubeconfig ADMIN_CLUSTER_KUBECONFIG cp \
  USER_CLUSTER_NAME/kube-etcd-0:/tmp/snapshot.db \
  --container kube-etcd snapshot.db

Controlplane V2

Get the etcd Pod's name:

kubectl --kubeconfig USER_CLUSTER_KUBECONFIG get pods \
 -n kube-system -l component=etcd,tier=control-plane -ojsonpath='{$.items[*].metadata.name}{"\n"}'

where:

USER_CLUSTER_KUBECONFIG is the user cluster's kubeconfig file.

Example:

NAME           READY   STATUS    RESTARTS   AGE
etcd-uc1-cp1   1/1     Running   0          38m
etcd-uc1-cp2   1/1     Running   0          37m
etcd-uc1-cp3   1/1     Running   0          38m

Note that there can be multiple etcd pods, example, 3 for HA clusters. For backup, any etcd pod should work.

Get a shell into the etcd container:

kubectl --kubeconfig USER_CLUSTER_KUBECONFIG exec -it \
 POD_NAME -c etcd -n kube-system -- /bin/sh

where:

POD_NAME is the name of the etcd pod taken from the previous step.

In your shell, create a backup file named snapshot.db:

ETCDCTL_API=3 etcdctl \
  --endpoints=https://127.0.0.1:2379 \
  --cacert=/etc/kubernetes/pki/etcd/ca.crt \
  --cert=/etc/kubernetes/pki/etcd/server.crt \
  --key=/etc/kubernetes/pki/etcd/server.key \
  snapshot save /tmp/snapshot.db

In your shell, enter exit to exit the shell.

Copy snapshot.db from the etcd container to the workstation home directory:

kubectl --kubeconfig USER_CLUSTER_KUBECONFIG \
 cp POD_NAME:/tmp/snapshot.db ~/snapshot.db \
 -c etcd -n kube-system

Copy the secrets from the PKI directory:
```
ssh -i NODE_NAME.key ubuntu@NODE_EXTERNAL_IP
sudo chmod -R 0644 /etc/kubernetes/pki/*
sudo chmod 0755 /etc/kubernetes/pki/etcd
exit
scp -ri NODE_NAME.key ubuntu@NODE_EXTERNAL_IP:/etc/kubernetes/pki ~/pki_NODE_NAME
```
where:
- NODE_NAME is the file containing ssh key for the control plane node
- NODE_EXTERNAL_IP is the IP address of the user control plane node from where you want the secrets to be copied from.

Restoring a user cluster from a backup (non-HA)

Before you use a backup file to restore your user cluster's etcd store, diagnose your cluster and resolve existing issues. Using a backup to restore a problematic cluster might re-create or exacerbate issues. Contact the Google Distributed Cloud support team for further assistance with restoring your clusters.

The following instructions explain how to use a backup file to restore a user cluster in cases where the cluster's etcd data has become damaged and the user cluster's etcd Pod is crashlooping.

Kubeception

You can restore the etcd data by deploying a utility Pod that overwrites the damaged data with the backup. The admin cluster's API server must be running and the admin cluster's scheduler must be able to schedule new Pods.

Find the name of the Secret used by etcd in the user cluster:

kubectl --kubeconfig ADMIN_CLUSTER_KUBECONFIG -n USER_CLUSTER_NAME \
   get secrets | grep kube-etcd-certs

Copy the following Pod manifest to a file named etcd-utility.yaml. Replace the following:

NODE_NAME: the node where the kube-etcd-0 Pod is running.
ADMIN_CLUSTER_KUBECONFIG: the admin cluster's kubeconfig file.
USER_CLUSTER_NAME: the name of the user cluster.
GKE_ON_PREM_VERSION: the version of the cluster where you want to perform the etcd restore (for example, 1.5.0-gke.0).
KUBE_ETCD_SECRET_NAME: the name of the Secret used by etcd in the user cluster, starting with kube-etcd-certs.

apiVersion: v1
kind: Pod
metadata:
 name: etcd-utility-0
 namespace: USER_CLUSTER_NAME
spec:
 containers:
 - command: ["/bin/sh"]
   args: ["-ec", "while :; do echo '.'; sleep 5 ; done"]
   image: gcr.io/gke-on-prem-release/etcd-util:GKE_ON_PREM_VERSION
   name: etcd-utility
   volumeMounts:
   - mountPath: /var/lib/etcd
     name: data
   - mountPath: /etcd.local.config/certificates
     name: etcd-certs
 nodeSelector:
   kubernetes.googleapis.com/cluster-name: USER_CLUSTER_NAME
   kubernetes.io/hostname: NODE_NAME
 tolerations:
 - effect: NoExecute
   key: node.kubernetes.io/not-ready
   operator: Exists
   tolerationSeconds: 300
 - effect: NoExecute
   key: node.kubernetes.io/unreachable
   operator: Exists
   tolerationSeconds: 300
 - effect: NoSchedule
   key: node.kubernetes.io/unschedulable
   operator: Exists
 volumes:
 - name: data
   persistentVolumeClaim:
     claimName: data-kube-etcd-0
 - name: etcd-certs
   secret:
     defaultMode: 420
     secretName: KUBE_ETCD_SECRET_NAME

Deploy the utility Pod:

kubectl --kubeconfig ADMIN_CLUSTER_KUBECONFIG \
  create -f etcd-utility.yaml --namespace USER_CLUSTER_NAME

Copy snapshot.db from the current directory to the root directory of the utility Pod:

kubectl --kubeconfig ADMIN_CLUSTER_KUBECONFIG cp snapshot.db \
  USER_CLUSTER_NAME/etcd-utility-0:snapshot.db --container etcd-utility

Get a shell into the etcd-utility container:

kubectl --kubeconfig ADMIN_CLUSTER_KUBECONFIG exec it \
  etcd-utility-0 --container etcd-utility --namespace USER_CLUSTER_NAME \
  -- bin/sh

In your shell, in the root directory, run the following command to create a new folder that contains the backup:

ETCDCTL_API=3 etcdctl \
  --endpoints=https://127.0.0.1:2379 \
  --cacert=/etcd.local.config/certificates/etcdCA.crt \
  --cert=/etcd.local.config/certificates/etcd.crt \
  --key=/etcd.local.config/certificates/etcd.key \
  snapshot restore snapshot.db

In your shell, delete the old etcd data:
```
rm -r var/lib/etcd/*
```
In your shell, copy the restored etcd data to its permanent location:
```
cp -r default.etcd/* var/lib/etcd/
```
In your shell, enter exit to exit the shell.

Delete the crashing etcd Pod:

kubectl --kubeconfig ADMIN_CLUSTER_KUBECONFIG \
  delete pod kube-etcd-0 --namespace USER_CLUSTER_NAME

Verify that the etcd Pod is no longer crashing.

Delete the utility Pod:

kubectl --kubeconfig ADMIN_CLUSTER_KUBECONFIG \
  delete pod etcd-utility-0 --namespace USER_CLUSTER_NAME

Remove etcd-utility.yaml from the current directory:
```
rm etcd-utility.yaml
```

Controlplane V2

You can restore the etcd data one at a time by deploying a temporary etcd container that overwrites the damaged data with the backup.

Get a shell into the user control plane node:

ssh -i NODE_NAME.key ubuntu@NODE_EXTERNAL_IP

In the shell, stop the Kubernetes API server and the etcd server:

sudo mv /etc/kubernetes/manifests/kube-apiserver.yaml /etc/kubernetes/manifests/etcd.yaml ~

In the shell, enter exit to exit the shell.

Run scp to copy the backup file snapshot.db & secrets to the user control plane node:

scp -i NODE_NAME.key ~/snapshot.db ubuntu@NODE_EXTERNAL_IP:/tmp/

chmod a+rw pki/
scp -ri NODE_NAME.key ~/pki_NODE_NAME ubuntu@NODE_EXTERNAL_IP:/etc/kubernetes/pki

In the shell, use snapshot.db to restore the etcd data:

sudo docker run --rm -t \
-v /opt/data/var/lib:/var/lib \
-v /etc/kubernetes/pki/etcd:/etc/kubernetes/pki/etcd \
-v /tmp:/tmp \
--env ETCDCTL_API=3 \
gcr.io/gke-on-prem-release/etcd-util:GKE_ON_PREM_VERSION etcdctl \
--cacert=/etc/kubernetes/pki/etcd/ca.crt \
--cert=/etc/kubernetes/pki/etcd/server.crt \
--key=/etc/kubernetes/pki/etcd/server.key \
--data-dir=/opt/data/var/lib/etcd \
--name=NODE_NAME \
--initial-advertise-peer-urls=https://NODE_IP_ADDRESS:2380 \
--initial-cluster=NODE_NAME=https://NODE_IP_ADDRESS:2380 \
snapshot restore /tmp/snapshot.db

where:

GKE_ON_PREM_VERSION is the GKE Enterprise version used as image tag
NODE_NAME is the name of the node where the restore is being performed
NODE_IP_ADDRESS is the IP of the said node

Add the flag - --initial-cluster-state=new in the etcd manifest file under container command.

Example:

containers:
      - command:
        - etcd
        ...
        - --initial-cluster-state=new
        ...

In the shell, start the kube-apiserver and etcd servers:

sudo mv etcd.yaml kube-apiserver.yaml /etc/kubernetes/manifests/

In the shell, enter exit to exit the shell.

Restoring a user cluster from a backup (HA)

Kubeception

This section shows how to restore the etcd data for a high-availability (HA) user cluster.

For an HA user cluster, there are three nodes in the admin cluster that serve as control planes for the user cluster. Each of those nodes runs an etcd Pod that maintains etcd data on a storage volume.

If two of the etcd Pods are healthy, and the data on the associated storage volumes is intact, then there is no need to use a backup file. That is because you still have an etcd quorum.

In the rare case that two of the etcd storage volumes have corrupt data, you need to use a backup file to restore the etcd data.

To perform the steps in this section, you must have already created a snapshot.db file as described in Backing up a user cluster.

Listing your etcd Pods and nodes

List the etcd Pods that manage the etcd store for your user cluster. These Pods run in the admin cluster:
```
kubectl --kubeconfig ADMIN_CLUSTER_KUBECONFIG get pods --namespace USER_CLUSTER_NAME \
--output wide | grep kube-etcd
```
The output shows the etcd Pods and the nodes where the Pods run. The nodes shown in the output are nodes in the admin cluster that serve as control planes for your user cluster:
```
NAME              ...   NODE
kube-etcd-0       ...   xxx
kube-etcd-1       ...   yyy
kube-etcd-2       ...   zzz
```
Make a note of the Pod names and the control plane node names for later.

Notice that each etcd Pod is named kube-etcd appended with a number. This number is called the member number for the Pod. It identifies the Pod as being a particular member of the etcd cluster that holds the object data for your user cluster. This guide uses the placeholder MEMBER_NUMBER to refer to the etcd Pod member number.

Also notice that each Pod in your etcd cluster runs on its own node.

Preparing to deploy the utility Pods

Save a manifest for the PodDisruptionBudget (PDB) for the user cluster's Kubernetes API server. Then delete the PDB.

kubectl --kubeconfig ADMIN_CLUSTER_KUBECONIFG get pdb --namespace USER_CLUSTER_NAME \
kube-apiserver-pdb --output yaml > kube-apiserver-pdb.yaml

kubectl --kubeconfig ADMIN_CLUSTER_KUBECONIFG delete pdb --namespace USER_CLUSTER_NAME \
kube-apiserver-pdb

Stop the Kubernetes API server and the etcd maintenance Deployment. This ensures that no components will use etcd during restoration:

kubectl --kubeconfig ADMIN_CLUSTER_KUBECONIFG --namespace USER_CLUSTER_NAME \
scale --replicas 0 statefulset kube-apiserver

kubectl --kubeconfig ADMIN_CLUSTER_KUBECONIFG --namespace USER_CLUSTER_NAME \
scale --replicas 0 deployment gke-master-etcd-maintenance

Recall the name of the container image for your etcd Pods.

Deploying the utility Pods

Recall the name of the etcd Pod and the name of the node where the Pod runs.
Save the following Pod manifest in the current directory in a file named etcd-utility-MEMBER_NUMBER.yaml:

 apiVersion: v1
 kind: Pod
 metadata:
   name: etcd-utility-MEMBER_NUMBER
   namespace: USER_CLUSTER_NAME
 spec:
   containers:
   - command: ["/bin/sh"]
     args: ["-ec", "while :; do echo '.'; sleep 5 ; done"]
     image: gcr.io/gke-on-prem-release/etcd-util:GKE_ON_PREM_VERSION
     name: etcd-utility
     volumeMounts:
     - mountPath: /var/lib/etcd
       name: data
     - mountPath: /etcd.local.config/certificates
       name: etcd-certs
   nodeSelector:
     kubernetes.googleapis.com/cluster-name: USER_CLUSTER_NAME
     kubernetes.io/hostname: NODE_NAME
   tolerations:
   - effect: NoExecute
     key: node.kubernetes.io/not-ready
     operator: Exists
     tolerationSeconds: 300
   - effect: NoExecute
     key: node.kubernetes.io/unreachable
     operator: Exists
     tolerationSeconds: 300
   - effect: NoSchedule
     key: node.kubernetes.io/unschedulable
     operator: Exists
   volumes:
   - name: data
     persistentVolumeClaim:
       claimName: data-kube-etcd-MEMBER_NUMBER
   - name: etcd-certs
     secret:
       defaultMode: 420
       secretName: KUBE_ETCD_SECRET_NAME

The preceding manifest describes a utility Pod that you run temporarily to restore etcd data.

Create the utility Pod in your admin cluster:

kubectl --kubeconfig ADMIN_CLUSTER_KUBECONFIG apply -f etcd-utility-MEMBER_NUMBER.yaml

Copy your backup file, snapshot.db, to the root directory of your utility Pod:

kubectl --kubeconfig ADMIN_CLUSTER_KUBECONIFG cp snapshot.db \
USER_CLUSTER_NAME/etcd-utility-MEMBER_NUMBER:snapshot.db

Get a shell into the etcd-utility container in the utility Pod:

kubectl --kubeconfig ADMIN_CLUSTER_KUBECONIFG exec -it --namespace USER_CLUSTER_NAME \
etcd-utility-MEMBER_NUMBER --container etcd-utility -- bin/sh

In your shell, in the root directory, use snapshot.db to restore the etcd data:

ETCDCTL_API=3 etcdctl \
--endpoints=https://127.0.0.1:2379 \
--cacert=/etcd.local.config/certificates/etcdCA.crt \
--cert=/etcd.local.config/certificates/etcd.crt \
--key=/etcd.local.config/certificates/etcd.key \
--name=kube-etcd-MEMBER_NUMBER \
--initial-cluster=kube-etcd-0=https://kube-etcd-0.kube-etcd:2380,kube-etcd-1=https://kube-etcd-1.kube-etcd:2380,kube-etcd-2=https://kube-etcd-2.kube-etcd:2380 \
--initial-cluster-token=etcd-cluster-1 \
--initial-advertise-peer-urls=https://kube-etcd-MEMBER_NUMBER.kube-etcd:2380 \
snapshot restore snapshot.db

The preceding command stored etcd data in the /kube-etcd-MEMBER_NUMBER.etcd directory.

In your shell, delete the old etcd data:
```
rm -r var/lib/etcd/*
```
In your shell, copy the restored etcd data to its permanent location:
```
cp -r kube-etcd-MEMBER_NUMBER.etcd/* var/lib/etcd/
```
In your shell, remove the temporary etcd directory and the backup file:
```
rm -R kube-etcd-MEMBER_NUMBER.etcd/
rm snapshot.db
```
In your shell, enter exit to exit the shell.

Delete the utility Pod:

kubectl --kubeconfig ADMIN_CLUSTER_KUBECONIFG delete pod \
--namespace USER_CLUSTER_NAME etcd-utility-MEMBER_NUMBER

Restarting components

Now that you have deployed and deleted your utility Pods, you need to restart some cluster components.

Restart the Pods in the kube-etcd StatefulSet:

kubectl --kubeconfig ADMIN_CLUSTER_KUBECONFIG rollout restart statefulset \
--namespace USER_CLUSTER_NAME kube-etcd

Start the Kubernetes API servers for your user cluster:

kubectl --kubeconfig ADMIN_CLUSTER_KUBECONIFG scale statefulset --replicas 3 \
--namespace USER_CLUSTER_NAME kube-apiserver

Start the etcd maintenance Deployment for your user cluster:

kubectl --kubeconfig ADMIN_CLUSTER_KUBECONIFG scale deployment --replicas 1 \
--namespace=USER_CLUSTER_NAME  gke-master-etcd-maintenance

Restore the PDB for the Kubernetes API server:

kubectl --kubeconfig ADMIN_CLUSTER_KUBECONIFG apply -f kube-apiserver-pdb.yaml

Controlplane V2

This section shows how to restore the etcd data for a high-availability (HA) user cluster.

For a HA user cluster, there are three nodes in the user cluster that serves as control plane for the user cluster. Each of those nodes runs an etcd Pod that maintains etcd data on a storage volume.

If two of the etcd Pods are healthy, and the data on the associated storage volumes is intact, then there is no need to use a backup file. That is because you'd still have an etcd quorum.

In the rare case that two of the etcd storage volumes have corrupt data, you need to use a backup file to restore the etcd data.

To do the steps in this section, you must have already created a snapshot.db file as described in Backing up a user cluster.

Listing your etcd Pods and nodes

List the etcd Pods and their respective node:
```
kubectl get pod --kubeconfig USER_CLUSTER_KUBECONFIG \
 -n kube-system -l component=etcd,tier=control-plane -o wide
```
The output shows the etcd Pods and the nodes where the Pods run. The nodes shown in the output are nodes in the admin cluster that serve as control planes for your user cluster:
```
NAME           ...   NODE
etcd-xxx       ...   xxx
etcd-yyy       ...   yyy
etcd-zzz       ...   zzz
```
Make a note of the Pod names and the control plane node names for later.

Notice that each etcd Pod is named etcd-xxx appended with a node name. This is because in Controlplane V2 the etcd pods runs as a static pod.

Preparing to restore

Run scp to copy the backup file snapshot.db to all the user control plane node:
```
scp ~/snapshot.db -i NODE_NAME.key ubuntu@NODE_EXTERNAL_IP:/tmp/
```

Copy the secrets to the respective user control plane node:

chmod a+rw pki/
scp -r ~/pki -i NODE_NAME.key ubuntu@NODE_EXTERNAL_IP:/etc/kubernetes/

Get a shell into the user control plane node:

ssh -i NODE_NAME.key ubuntu@NODE_EXTERNAL_IP

Performing the restore

Recall the name of the etcd Pod and the name of the node where the Pod runs.
In the shell, stop the Kubernetes API server and the etcd server on all the user control plane nodes:
```
sudo mv /etc/kubernetes/manifests/kube-apiserver.yaml /etc/kubernetes/manifests/etcd.yaml ~
```

In the shell, use snapshot.db to restore the etcd data on all the user control plane nodes:

sudo docker run --rm -t \
-v /opt/data/var/lib:/var/lib \
-v /etc/kubernetes/pki/etcd:/etc/kubernetes/pki/etcd \
-v /tmp:/tmp \
--env ETCDCTL_API=3 \
gcr.io/gke-on-prem-release/etcd-util:GKE_ON_PREM_VERSION etcdctl \
--cacert=/etc/kubernetes/pki/etcd/ca.crt \
--cert=/etc/kubernetes/pki/etcd/server.crt \
--key=/etc/kubernetes/pki/etcd/server.key \
--data-dir=/opt/data/var/lib/etcd \
--name=NODE_NAME \
--initial-advertise-peer-urls=https://NODE_IP_ADDRESS:2380 \
--initial-cluster=NODE1=https://NODE1_IP:2380,NODE2=https://NODE2_IP:2380,NODE3=https://NODE3_IP:2380 \
snapshot restore /tmp/snapshot.db

where:

GKE_ON_PREM_VERSION is the GKE Enterprise version used as image tag
NODE_NAME is the name of the node where the restore is being performed
NODE_IP_ADDRESS is the IP of the said node
Fill the NODE1, NODE2, NODE3 and the IP of their respective node for --initial-cluster flag. You can also get this from the etcd manifest.

Add the flag - --initial-cluster-state=existing in the etcd manifest file under container command.

Example:

containers:
      - command:
        - etcd
        ...
        - --initial-cluster-state=existing
        ...

Restarting components

In the shell, start the kube-apiserver and etcd servers to all the user control plane node:
```
sudo mv ~/etcd.yaml ~/kube-apiserver.yaml /etc/kubernetes/manifests/
```
In the shell, enter exit to exit the shell.

Verify the kube-apiserver and etcd is running on all user control plane nodes:

kubectl get pod --kubeconfig USER_CLUSTER_KUBECONFIG \
-n kube-system -l tier=control-plane

Automatic cluster backup

You can use the script given here as an example on how to automatically back up your clusters. Note that the following script is not supported, and should only be used as reference to write a better, more robust and complete script. Before you run the script, fill in values for the five variables at the beginning of the script:

Kubeception

Set BACKUP_DIR to the path where you want to store the admin and user cluster backups. This path shouldn't exist.
Set ADMIN_CLUSTER_KUBECONFIG to the path of the admin cluster's kubeconfig file
Set USER_CLUSTER_NAMESPACE to the name of your user cluster. The name of your user cluster is a namespace in the admin cluster.
Set EXTERNAL_IP to the VIP that you reserved for the admin control plane service.
Set SSH_PRIVATE_KEY to the path of your SSH key.
If you are using a private network, set JUMP_IP to your network's jump server's IP address.

#!/usr/bin/env bash

# Automates manual steps for taking backups of user and admin clusters.
# Fill in the variables below before running the script.

BACKUP_DIR=""                       # path to store user and admin cluster backups
ADMIN_CLUSTER_KUBECONFIG=""         # path to admin cluster kubeconfig
USER_CLUSTER_NAMESPACE=""           # user cluster namespace
EXTERNAL_IP=""                      # admin control plane node external ip - follow steps in documentation
SSH_PRIVATE_KEY=""                  # path to vsphere_tmp ssh private key - follow steps in documentation
JUMP_IP=""                          # network jump server IP - leave empty string if not using private network.

mkdir -p $BACKUP_DIR
mkdir $BACKUP_DIR/pki

# USER CLUSTER BACKUP

# Snapshot user cluster etcd
kubectl --kubeconfig=${ADMIN_CLUSTER_KUBECONFIG} exec -it -n ${USER_CLUSTER_NAMESPACE} kube-etcd-0 -c kube-etcd -- /bin/sh -ec "export ETCDCTL_API=3; etcdctl --endpoints=https://127.0.0.1:2379 --cacert=/etcd.local.config/certificates/etcdCA.crt --cert=/etcd.local.config/certificates/etcd.crt --key=/etcd.local.config/certificates/etcd.key snapshot save ${USER_CLUSTER_NAMESPACE}_snapshot.db"
kubectl --kubeconfig=${ADMIN_CLUSTER_KUBECONFIG} cp ${USER_CLUSTER_NAMESPACE}/kube-etcd-0:${USER_CLUSTER_NAMESPACE}_snapshot.db $BACKUP_DIR/user-cluster_${USER_CLUSTER_NAMESPACE}_snapshot.db 

# ADMIN CLUSTER BACKUP

# Set up ssh options
SSH_OPTS=(-oStrictHostKeyChecking=no -i ${SSH_PRIVATE_KEY})
if [ "${JUMP_IP}" != "" ]; then
  SSH_OPTS+=(-oProxyCommand="ssh -oStrictHostKeyChecking=no -i ${SSH_PRIVATE_KEY} -W %h:%p ubuntu@${JUMP_IP}")
fi

# Copy admin certs
ssh "${SSH_OPTS[@]}" ubuntu@${EXTERNAL_IP} 'sudo chmod -R +rw /etc/kubernetes/pki/*'
scp -r "${SSH_OPTS[@]}" ubuntu@${EXTERNAL_IP}:/etc/kubernetes/pki/* ${BACKUP_DIR}/pki/

# Snapshot admin cluster etcd
admin_etcd=$(kubectl --kubeconfig=${ADMIN_CLUSTER_KUBECONFIG} get pods -n kube-system -l component=etcd,tier=control-plane -ojsonpath='{$.items[*].metadata.name}{"\n"}')
kubectl --kubeconfig=${ADMIN_CLUSTER_KUBECONFIG} exec -it -n kube-system ${admin_etcd} -- /bin/sh -ec "export ETCDCTL_API=3; etcdctl --endpoints=https://127.0.0.1:2379 --cacert=/etc/kubernetes/pki/etcd/ca.crt --cert=/etc/kubernetes/pki/etcd/healthcheck-client.crt --key=/etc/kubernetes/pki/etcd/healthcheck-client.key snapshot save admin_snapshot.db"
kubectl --kubeconfig=${ADMIN_CLUSTER_KUBECONFIG} cp -n kube-system ${admin_etcd}:admin_snapshot.db $BACKUP_DIR/admin-cluster_snapshot.db

Controlplane V2

Set BACKUP_DIR to the path where you want to store the admin and user cluster backups. This path shouldn't exist.
Set ADMIN_CLUSTER_KUBECONFIG to the path of the admin cluster's kubeconfig file
Set USER_CLUSTER_KUBECONFIG to the path of your user cluster kubeconfig.
Set EXTERNAL_IP to the VIP that you reserved for the admin control plane service.
Set SSH_PRIVATE_KEY to the path of your SSH key.
If you are using a private network, set JUMP_IP to your network's jump server's IP address.

#!/usr/bin/env bash

# Automates manual steps for taking backups of user and admin clusters.
# Fill in the variables below before running the script.

BACKUP_DIR=""                       # path to store user and admin cluster backups
ADMIN_CLUSTER_KUBECONFIG=""         # path to admin cluster kubeconfig
USER_CLUSTER_KUBECONFIG=""          # path to user cluster kubeconfig
EXTERNAL_IP=""                      # admin control plane node external ip - follow steps in documentation
SSH_PRIVATE_KEY=""                  # path to ssh private key - follow steps in documentation
JUMP_IP=""                          # network jump server IP - leave empty string if not using private network

mkdir -p $BACKUP_DIR
mkdir $BACKUP_DIR/pki

# USER CLUSTER BACKUP
user_etcd=$(kubectl --kubeconfig=${USER_CLUSTER_KUBECONFIG} get pods -n kube-system -l component=etcd,tier=control-plane -ojsonpath='{$.items[0].metadata.name}{"\n"}')
kubectl --kubeconfig=${USER_CLUSTER_KUBECONFIG} exec -it -n kube-system ${user_etcd} -c etcd -- /bin/sh -ec "export ETCDCTL_API=3; etcdctl --endpoints=https://127.0.0.1:2379 --cacert=/etc/kubernetes/pki/etcd/ca.crt --cert=/etc/kubernetes/pki/etcd/server.crt --key=/etc/kubernetes/pki/etcd/server.key snapshot save /tmp/${user_etcd}_snapshot.db"
kubectl --kubeconfig=${USER_CLUSTER_KUBECONFIG} cp kube-system/${user_etcd}:/tmp/${user_etcd}_snapshot.db $BACKUP_DIR/${user_etcd}_snapshot.db

# ADMIN CLUSTER BACKUP

# Set up ssh options
SSH_OPTS=(-oStrictHostKeyChecking=no -i ${SSH_PRIVATE_KEY})
if [ "${JUMP_IP}" != "" ]; then
  SSH_OPTS+=(-oProxyCommand="ssh -oStrictHostKeyChecking=no -i ${SSH_PRIVATE_KEY} -W %h:%p ubuntu@${JUMP_IP}")
fi

# Copy admin certs
ssh "${SSH_OPTS[@]}" ubuntu@${EXTERNAL_IP} 'sudo chmod -R +rw /etc/kubernetes/pki/*'
scp -r "${SSH_OPTS[@]}" ubuntu@${EXTERNAL_IP}:/etc/kubernetes/pki/* ${BACKUP_DIR}/pki/

# Snapshot admin cluster etcd
admin_etcd=$(kubectl --kubeconfig=${ADMIN_CLUSTER_KUBECONFIG} get pods -n kube-system -l component=etcd,tier=control-plane -ojsonpath='{$.items[*].metadata.name}{"\n"}')
kubectl --kubeconfig=${ADMIN_CLUSTER_KUBECONFIG} exec -it -n kube-system ${admin_etcd} -- /bin/sh -ec "export ETCDCTL_API=3; etcdctl --endpoints=https://127.0.0.1:2379 --cacert=/etc/kubernetes/pki/etcd/ca.crt --cert=/etc/kubernetes/pki/etcd/healthcheck-client.crt --key=/etc/kubernetes/pki/etcd/healthcheck-client.key snapshot save /tmp/${admin_etcd}_snapshot.db"
kubectl --kubeconfig=${ADMIN_CLUSTER_KUBECONFIG} cp -n kube-system ${admin_etcd}:/tmp/${admin_etcd}_snapshot.db $BACKUP_DIR/${admin_etcd}_snapshot.db

Verify the restoration

To verify that your cluster was successfully restored, run gkectl diagnose cluster.

What's next

Back up and restore an admin cluster
Learn how to diagnose cluster issues
Learn about augur, an open-source tool for restoring individual objects from etcd backups.