gcloud beta memorystore instances update

NAME: gcloud beta memorystore instances update - update the configuration of a Memorystore instance
SYNOPSIS: gcloud beta memorystore instances update (INSTANCE : --location=LOCATION) [--async] [--[no-]deletion-protection-enabled] [--replica-count=REPLICA_COUNT] [--request-id=REQUEST_ID] [--shard-count=SHARD_COUNT] [--aof-config-append-fsync=AOF_CONFIG_APPEND_FSYNC --persistence-config-mode=PERSISTENCE_CONFIG_MODE --rdb-config-snapshot-period=RDB_CONFIG_SNAPSHOT_PERIOD --rdb-config-snapshot-start-time=RDB_CONFIG_SNAPSHOT_START_TIME] [--engine-configs=[ENGINE_CONFIGS,…] | --update-engine-configs=[UPDATE_ENGINE_CONFIGS,…] --clear-engine-configs | --remove-engine-configs=[__REMOVE_ENGINE_CONFIGS,…]] [--labels=[LABELS,…] | --update-labels=[UPDATE_LABELS,…] --clear-labels | --remove-labels=[__REMOVE_LABELS,…]] [GCLOUD_WIDE_FLAG …]
DESCRIPTION: (BETA) Update the configuration of a Memorystore instance.
EXAMPLES: To update Memorystore instance my-instance in project my-project and location us-central1 to six shards, run:
gcloud beta memorystore instances update `my-instance` --project=my-project --location=us-central1 --shard-count=6

To update Memorystore instance my-instance in project my-project and location us-central1 to use a maxmemory-policy of allkeys-lru, run:
gcloud beta memorystore instances update `my-instance` --project=my-project --location=us-central1 --update-engine-configs=maxmemory-policy=allkeys-lru
POSITIONAL ARGUMENTS: Instance resource - Identifier. Unique name of the instance. Format: projects/{project}/locations/{location}/instances/{instance} The arguments in this group can be used to specify the attributes of this resource. (NOTE) Some attributes are not given arguments in this group but can be set in other ways.
To set the project attribute:

provide the argument instance on the command line with a fully specified name;

provide the argument --project on the command line;

set the property core/project.

This must be specified.

INSTANCE

ID of the instance or fully qualified identifier for the instance.
To set the instance attribute:

provide the argument instance on the command line.

This positional argument must be specified if any of the other arguments in this group are specified.

--location=LOCATION

The location id of the instance resource.
To set the location attribute:

provide the argument instance on the command line with a fully specified name;

provide the argument --location on the command line.
FLAGS: --async

Return immediately, without waiting for the operation in progress to complete.

Arguments for the deletion protection enabled.

--[no-]deletion-protection-enabled

If set to true deletion of the instance will fail. Use --deletion-protection-enabled to enable and --no-deletion-protection-enabled to disable.

Arguments for the replica count.

--replica-count=REPLICA_COUNT

Number of replica nodes per shard. If omitted the default is 0 replicas.

--request-id=REQUEST_ID

An optional request ID to identify requests. Specify a unique request ID so that if you must retry your request, the server will know to ignore the request if it has already been completed. The server will guarantee that for at least 60 minutes since the first request.
For example, consider a situation where you make an initial request and the request times out. If you make the request again with the same request ID, the server can check if original operation with the same request ID was received, and if so, will ignore the second request. This prevents clients from accidentally creating duplicate commitments.
The request ID must be a valid UUID with the exception that zero UUID is not supported (00000000-0000-0000-0000-000000000000).

--shard-count=SHARD_COUNT

Number of shards for the instance.

Represents persistence configuration for a instance.

Configuration for AOF based persistence.

--aof-config-append-fsync=AOF_CONFIG_APPEND_FSYNC

The fsync mode. AOF_CONFIG_APPEND_FSYNC must be one of:

always

Fsync every time new write commands are appended to the AOF. The best data loss protection at the cost of performance.

every-sec

Fsync every second. You may lose 1 second of data if there is a disaster.

never

Never fsync. Normally Linux will flush data every 30 seconds with this configuration, but it's up to the kernel's exact tuning.

--persistence-config-mode=PERSISTENCE_CONFIG_MODE

Current persistence mode. PERSISTENCE_CONFIG_MODE must be one of:

aof

AOF based persistence is enabled.

disabled

Persistence is disabled, and any snapshot data is deleted.

rdb

RDB based persistence is enabled.

Configuration for RDB based persistence.

--rdb-config-snapshot-period=RDB_CONFIG_SNAPSHOT_PERIOD

Period between RDB snapshots. RDB_CONFIG_SNAPSHOT_PERIOD must be one of:

one-hour

One hour.

six-hours

Six hours.

twelve-hours

Twelve hours.

twenty-four-hours

Twenty four hours.

--rdb-config-snapshot-start-time=RDB_CONFIG_SNAPSHOT_START_TIME

Time that the first snapshot was/will be attempted, and to which future snapshots will be aligned. If not provided, the current time will be used.

Update engine_configs.
At most one of these can be specified:

--engine-configs=[ENGINE_CONFIGS,…]

Set engine_configs to new value. User-provided engine configurations for the instance.

KEY

Sets KEY value.

VALUE

Sets VALUE value.

Shorthand Example:
--engine-configs=string=string

JSON Example:
--engine-configs='{"string": "string"}'

File Example:
--engine-configs=path_to_file.(yaml|json)

--update-engine-configs=[UPDATE_ENGINE_CONFIGS,…]

Update engine_configs value or add key value pair. User-provided engine configurations for the instance.

KEY

Sets KEY value.

VALUE

Sets VALUE value.

Shorthand Example:
--update-engine-configs=string=string

JSON Example:
--update-engine-configs='{"string": "string"}'

File Example:
--update-engine-configs=path_to_file.(yaml|json)

At most one of these can be specified:

--clear-engine-configs

Clear engine_configs value and set to empty map.

--remove-engine-configs=[__REMOVE_ENGINE_CONFIGS,…]

Remove existing value from map engine_configs.

Update labels.
At most one of these can be specified:

--labels=[LABELS,…]

Set labels to new value. Labels to represent user-provided metadata.

KEY

Keys must start with a lowercase character and contain only hyphens (-), underscores (_), lowercase characters, and numbers.

VALUE

Values must contain only hyphens (-), underscores (_), lowercase characters, and numbers.

Shorthand Example:
--labels=string=string

JSON Example:
--labels='{"string": "string"}'

File Example:
--labels=path_to_file.(yaml|json)

--update-labels=[UPDATE_LABELS,…]

Update labels value or add key value pair. Labels to represent user-provided metadata.

KEY

Keys must start with a lowercase character and contain only hyphens (-), underscores (_), lowercase characters, and numbers.

VALUE

Values must contain only hyphens (-), underscores (_), lowercase characters, and numbers.

Shorthand Example:
--update-labels=string=string

JSON Example:
--update-labels='{"string": "string"}'

File Example:
--update-labels=path_to_file.(yaml|json)

At most one of these can be specified:

--clear-labels

Clear labels value and set to empty map.

--remove-labels=[__REMOVE_LABELS,…]

Remove existing value from map labels.
GCLOUD WIDE FLAGS: These flags are available to all commands: --access-token-file, --account, --billing-project, --configuration, --flags-file, --flatten, --format, --help, --impersonate-service-account, --log-http, --project, --quiet, --trace-token, --user-output-enabled, --verbosity.
Run $ gcloud help for details.
API REFERENCE: This command uses the memorystore/v1beta API. The full documentation for this API can be found at: https://cloud.google.com/memorystore/
NOTES: This command is currently in beta and might change without notice. These variants are also available:
gcloud memorystore instances update

gcloud alpha memorystore instances update